Welcome to Eazi-Grip Australia!

Why Eazi-Grip?

Manufactured in the UK from high quality polyurethane, Eazi-Grip tank grips are designed to be applied to the fuel tank recesses next to the riders knees to provide additional grip and therefore less effort and greater control in corners and under braking.

Being polyurethane, Eazi-Grip tank grips are different to other grips on the market, and provide a unique combination of benefits.

The material itself is very durable but has a soft feel, which will appeal to those that find other grips too harsh or aggressive, or that find their leathers and clothing suffer excessive wear.

Importantly, and unlike some other brands, Eazi-Grip grips are available in both Black and Clear, so riders that like to preserve the original appearance of their bike have a 'clear' option.

And again, unlike some other brands, polyurethane is 100% UV resistant, so will not harden or, in the case of the Clear grips, turn yellow with age.

Choose from EVO or PRO

Not all tank grips are the same, and choice is usually down to rider preference.

Race developed in BSB and Isle of Man TT for race, track-days, or simply having a blast, Eazi-Grip PRO Tank Grips features a unique, circular embossed pattern with a very flat, low profile that combines excellent grip and durability with exceptional rider feel. Unlike other grips that rely on an aggressive profile that can restrict movement, PRO Tank Grips have been specifically designed to allow greater movement on the bike whilst giving high levels of grip when needed through corners and under heavy braking.

Eazi-Grip PRO Clear

EVO tank grips on the other hand have a more pronounced domed profile that is very easy to grip but is not aggressive or harsh. This gives the rider increased control with minimal effort, thereby reducing fatigue especially over long distances, which makes the EVO grip an excellent choice for the sports tourer or more relaxed rider.

Eazi-Grip EVO Clear

Choose from Pre-Cut, Universal or DIY-cut Rectangular Sheets

Eazi-Grip tank grips are available pre-cut to suit most sports, naked and sports touring bikes. In the event that a pre-cut grip is not available for your bike, simply cut your own to suit using our DIY-cut rectangular sheets, or choose from our range of universal grips in a choice of shapes and sizes.

Application

Eazi-grip tank grips have been carefully developed for road, race and track use and are used by teams in both BSB and WSB. Careful preparation and application will ensure maximum performance in all environments.

Use the IPA cleaner supplied with the grips to prepare surface area (not methylated spirits/petrol/lighter fluid etc. as these leave behind a thin, greasy residue). For best results ensure prepared surface is above 10oC; using a hairdryer to warm the surface is recommended.

Peel back part of the release liner then press the tank grip firmly onto the tank and slowly peel back the liner whilst applying the grip. Push down the surface and take care not to trap air bubbles as you go. Allow 48 hours for the adhesive to fully bond before using the grips.

 

Common Application Errors

1) Surface is prepared using incorrect cleaner.
2) Surface is cleaned using inappropriate material.
3) Surface has recently been sprayed, painted. has new transfers or new logos.
4) Surface is below application temperature.
5) Tank grip is below application temperature.
6) Surface has protective wax/polish/coating.
7) Incorrect pressure applied during application.
8) Tank grips used before full adhesive bond has formed.

Removal

Eazi-Grip tank grips are produced using a specially formulated acrylic adhesive system. Removal should take place with the assistance of a heat source such as a hair dryer and any residual adhesive should be removed using an IPA cleaner (Isopropanol alcohol). We include an IPA wipe in every Eazi-Grip kit so you can clean the surface without contanimation.